Jim Barber wrote:
> Then that begs the question - Marketing claims aside, what would be an
> appropriate max output power to run with a SB1000/AL80 ?
>
> It's a timely question for me, at least. I have a nice SB1000 that's
> been in the storage room for 5 years or so and was thinking about
> getting it out and putting a tube in it. It has 160m, which my 3KA and
> PA77's have not. It also doesn't cause gale force winds in the shack... ;-)
I load mine to 400ma plate current and get about 750 watts (slightly less on
10m, more on
80/40). Interestingly, I get less power on 160 than 80/40, and I think this is
because the
tank coil is close to the steel cover.
--
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|