Where were you when I needed you?
That would have been a fantastic addition to my SB-220 rebuild. I
originally intended to use an original switch but couldn't find a good one
and bought a generic one. It would have been just as simple to do what you
did while I had it all apart.
Great idea!
Jeff/KD4RBG
http://www.kd4rbg.com
On Mon, Nov 30, 2009 at 4:10 PM, Edwin Karl <edk0kl@centurytel.net> wrote:
>
> To add standby to an SB-200 I replaced the output meter power control
> pot to one with a push pull on off switch. On my SB-220 I added a new
> metering switch with an extra position and used the second wafer to
> open the keying lead. Always bothered me to turn these things on and
> off when using the exciter to adjust the antenna matcher. Didn't want to
> cut the cabinet.
>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|