My 3KA runs around 4050V unkeyed @ 247VAC line voltage. (line voltage is
high and stiff here)
And it does have the choke as well. I could look up the bleeder
resistors if anyone is interested in the current, but I don't remember
off the top of my head.
73, Jim N7CXI
Steve Katz wrote:
> The Henrys mostly ran about 3800V Ep. That's the secret sauce.
>
> Many (probably most) also had a HV choke which required serious bleeder
> current. That's the secret heat!
>
> WB2WIK/6
>
> -----Original Message-----
> From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com]On
> Behalf Of Carl
> Sent: Tuesday, December 01, 2009 2:50 PM
> To: Gudguyham@aol.com; vic@rakefet.com
> Cc: amps@contesting.com
> Subject: Re: [Amps] SB-220: 1,800 Watts Output
>
>
> But not at 2500 Ep
>
> Carl
> KM1H
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|