I don't know what you mean by "280 ohms ground" either, but if you are
having trouble with the RS35a output voltage going to zero when you transmit,
I've had that problem also and solved it by winding the dc output wires from
the RS35a around an appropriate ferrite toroid core.
Lee, KI7UR
In a message dated 1/25/2010 1:29:33 PM Mountain Standard Time,
cchedrick@gmail.com writes:
> HI all,
> I'm having an RF issue only when I try to load my Hunter 2000C on 20m.
> All
> other bands, including 18 and 21 have no issues for full power out. This
> is
> getting into my RS-35a power supply which is tied into the ground as well.
> I've got 280 ohms ground so that's not the issue. I think it's something
> to
> do with this power supply, any thoughts?
> best 73,
> Cam
> WA4JKW
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|