Look for a Papst or EBM blower. German made and very high quality. They have
on line and down loadable catalogs. These are what Ameritron uses in their
amps. I have one in my new home brew 8877 amp. See:
http://s900.photobucket.com/albums/ac206/w7ry/8877%20Amplifier/
for pictures.
73
Jim W7RY
On Sun, Feb 7, 2010 at 9:58 PM, Roland AH6RR <Toesonnose@hawaii.rr.com>wrote:
> Hello All,
>
> I need to replace the blower in my Henry 2KD-5 as it is so noisey it is
> driving me nuts. The one in there now is loose/worn out it has too much slop
> on the motor shaft. The blower is a Howard Industries 1175-12-4/ SPN 4267.
> Does anyone know of a Dayton or Fasco part number that will fit in this amp?
> Would like to get one with Ball Bearings but if a sleave bearing is all that
> will fit then I will use that.
>
> Thanks
> Roland AH6RR
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|