| To: | <amps@contesting.com> |
|---|---|
| Subject: | Re: [Amps] Results from new PSUD... resistor b4 the B+ filter caps ! |
| From: | "Paul Christensen" <w9ac@arrl.net> |
| Date: | Thu, 11 Feb 2010 13:00:41 -0500 |
| List-post: | <amps@contesting.com">mailto:amps@contesting.com> |
> If you want to protect the HV connector, cabling etc. then the glitch > resistor should be placed near the power supply. Well, that was obvious, Gary. Why couldn't I have visualized that until after hitting the send button? <g> Paul, W9AC _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [Amps] Results from new PSUD... resistor b4 the B+ filter caps !, Bill, W6WRT |
|---|---|
| Next by Date: | Re: [Amps] Results from new PSUD... resistor b4 the B+ filter caps !, TexasRF |
| Previous by Thread: | Re: [Amps] Shorted Electrolytics, a real fact, Carl |
| Next by Thread: | Re: [Amps] Results from new PSUD... resistor b4 the B+ filter caps !, TexasRF |
| Indexes: | [Date] [Thread] [Top] [All Lists] |