Amps
[Top] [All Lists]

[Amps] WD-40

To: <amps@contesting.com>
Subject: [Amps] WD-40
From: "Jim Thomson" <Jim.thom@telus.net>
Date: Tue, 2 Mar 2010 19:58:03 -0800
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Date: Tue, 02 Mar 2010 04:20:59 +0000
From: Ron Youvan <ka4inm@tampabay.rr.com>
Subject: Re: [Amps] WD-40 Is Not....

> Hmmm, maybe I need a tank of liquid nitrogen hooked up to a modified
> pressure washer wand. We used to use that stuff all the time in the RF labs
> I used to work in.

   My buddy, when he worked in the air conditioning field, use to squirt 
warehouse roaches with 
freon 12, the first drop froze them, flipped them on their back and turned them 
all white in the 
first second.
-- 
    Ron KA4INM - I'm proud to be Chuck's pop!

##  On a CBC radio documentary, back in the 80's... they had this fellow on 
there  from WD-40. 
The story went they were trying to cook up something in a lab, for a specific 
application, and failed.
The failed goop they had come up with, however, had other interesting 
properties, like for loosening
rusted/seized bolts etc.  Then came along the next 200 x uses.   They named the 
failed goop, 'WD-40'
and the rest is history.  Apparently, it's nothing more than glorified  
kerosene. 

## The telco I worked for, stopped buying it, in the mid 80's, and instead 
switched to this stuff
called LPS-1... and also LPS-2  and also LPS-3    The LPS-1 spray bomb is used 
for fine machine 
parts, screws, etc,  The LPS-2  is thicker, and the LPS-3 is used for stuff 
like lubricating chains, and is
really thick.    LPS  smells awful... like bad perfume. it also doesn't 
evaporate in 20 mins.. like WD-40.

##  for killing wasps nest below trailer's,  and also telco box's in the field, 
the I+R  fellow's  would grab
a big CO-2  fire extinguisher, and blast em with it.. all dead,  instant freeze 
dried.   We  once had a 
contactor cut  though an un-used , embedded  conduit in the floor, with his 
diamond bit  core drilling
rig,, cutting  a 6" diam  core  through  re-enforced concrete, 8" thick.   The 
big [$1200]  core bit
is water cooled.   The water ran down the inside of the conduit [ not on any 
1951 building plan],and
came out the other end.. in the basement,  into the main 400A   3 -phase  
208/120 v  panel !  

##  The fix to get the water out, asap... blast the panel [ with covers 
removed]  with the 
entire CO-2 extinguisher., including all 3 pole breakers, buss bars, the lot.   
Worked good,
water gone. 

later....... Jim  VE7RF  
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>