Amps
[Top] [All Lists]

Re: [Amps] FW: GS35b Bias

To: "'MIKE DURKIN'" <patriot121@msn.com>, "'amps fourm'" <amps@contesting.com>
Subject: Re: [Amps] FW: GS35b Bias
From: "Gary Schafer" <garyschafer@comcast.net>
Reply-to: garyschafer@comcast.net
Date: Tue, 9 Mar 2010 18:20:18 -0500
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Go here if you haven't already.
http://bias.gs35b.com/

73
Gary K4FMX

> -----Original Message-----
> From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com]
> On Behalf Of MIKE DURKIN
> Sent: Tuesday, March 09, 2010 6:02 PM
> To: amps fourm
> Subject: [Amps] FW: GS35b Bias
> 
> 
> 
> 
> 
> 
> From: patriot121@msn.com
> To: jan@on6zg.be
> Subject: RE: [Amps] GS35b Bias
> Date: Tue, 9 Mar 2010 15:01:59 -0800
> 
> 
> 
> Yea, G3SEK uses a TL431 and a PNP pass transistor .... Im just trying to
> get by on whats already there ... Does any one else have comments about
> Noise from the LM317t compared to the TL431 ???
> 
> Mike
> KC7NOA
> 
> > snip> Subject: RE: [Amps] GS35b Bias
> > Date: Tue, 9 Mar 2010 21:54:25 +0100
> >
> > I'm using a tip147 or BD equivalent. You can also check G3SEK triode
> board
> >
> > 73 Jan ON6ZG
> >
> > -----Oorspronkelijk bericht-----
> > Van: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com]
> Namens
> > MIKE DURKIN
> > Verzonden: dinsdag 9 maart 2010 0:57
> > Aan: ka4inm@tampabay.rr.com; amps fourm
> > Onderwerp: Re: [Amps] GS35b Bias
> >
> >
> > thats right ... my amp does not have a PNP, only NPN trans good to
> 1200v@10A
> > .... i want to replace the minum of parts ...
> >
> > You dont see an improvement ?? I was leaning towards a variable Bias
> with a
> > LM317t and a NPN pass transistor .. simply because its what i have ...
> and
> > im trying not to buy anything.
> >
> > Mike
> > KC7NOA
> > > >
> > > Hi MIKE DURKIN:
> > >
> > > > ok, I made a quick draw of what im wanting to do .. basically
> replace
> > > > the Zener in the all black drawing .. I forgot to add a Blocking
> diode
> > > > in series ok the 1k resistor that's tied to the NPN transistor ..
> > >
> > > I see no PNP, but if the circuit on the left is the original it is
> an
> > "amplified Zener."
> > > The LM317 will generate much more noise and not be any improvement
> that I
> > can see.
> > > --
> > > Ron KA4INM - I'm proud to be Chuck's pop!
> 
> 
> 
> Your E-mail and More On-the-Go. Get Windows Live Hotmail Free. Sign up
> now.
> _________________________________________________________________
> Hotmail: Powerful Free email with security by Microsoft.
> http://clk.atdmt.com/GBL/go/201469230/direct/01/
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>