Thanks John, I think the company made a model 802 choke which was more
suitable for "generic" applications at 1.8 mhz.
Lnae
Ku7i
-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com]
On Behalf Of John Lyles
Sent: Sunday, March 21, 2010 8:43 AM
To: amps@contesting.com
Subject: [Amps] B&W 800 RF choke
I used one as a screen choke at 2800 KHz, in a 100 kW amplifier at work.
It was fine there, but not sure about 1900. This was 12 years ago. I
took data on a B&W 800 using a vector impedance meter and plotted it. If
I can find it tomorrow, will scan and ship it here.
> Does a B & W model 800 plate choke have enough inductance to work on
> 160? I thought it did not.
> Lane
> Ku7i
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|