ORIGINAL MESSAGE:
On Sat, 27 Mar 2010 09:31:45 -0400, "Paul Christensen" <w9ac@arrl.net>
wrote:
>
>Nice looking amp. Are those Simpson panel meters on the RF unit? Also, I
>see a pair of yellow "tip" test jacks on the front panel. Are those used
>for filament V monitoring?
>
>Paul, W9AC
REPLY:
Thanks for the nice words, Paul. Yes all three meters are Simpsons,
the one on the power supply is a different model, one I had for years.
The two on the amp were purchased just for it.
And yes, the test jacks are for monitoring filament voltage. There is
a small variac on the120 V AC line input.
The three lamps are, right to left: 1. Warmup completed, 2. Standby
(keying circuit enabled) and 3. Transmit.
73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|