| To: | baswaplist <baswaplist@muchstuff.com>, Amps reflector <amps@contesting.com> |
|---|---|
| Subject: | [Amps] WANTED -- Plate xfmr, SB-200 or similar |
| From: | Vic K2VCO <vic@rakefet.com> |
| Date: | Tue, 30 Mar 2010 09:26:53 -0700 |
| List-post: | <amps@contesting.com">mailto:amps@contesting.com> |
Wanted -- plate transformer, about 900V or 1750V secondary, to deliver about 2200 - 2500 VDC at 400 - 500 ma. 240V primary greatly preferred. An SB-200 transformer would be perfect. Yes, I know Harbach sells a nice one, but it's over my budget for this project. -- Vic, K2VCO Fresno CA http://www.qsl.net/k2vco/ _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [Amps] unbuilt SB-220 on Ebay.... WHY?, chas |
|---|---|
| Next by Date: | Re: [Amps] Good engineering...More Car Computer Horror Stories, Randall, Randy |
| Previous by Thread: | [Amps] 1/4 wave shorted stubs on amp output, Jim Thomson |
| Next by Thread: | Re: [Amps] HV supply filter caps value formula, Ryan Foster |
| Indexes: | [Date] [Thread] [Top] [All Lists] |