Carl wrote:
>
> ** Thats why they make aluminum, it is less sensitive to the RF field.
> Ive had aluminum covers bent for Amp Supply (especially No Tunes),
> Clipperton L, MLA-2500, and others. 1200W out on 10M in a Clipperton with
> 100W is now easy and with no tube color.
>
Carl, that just means you're not driving them hard enough <:-))
It probably means you won't have that output coax short either. I'd say
back when I was in business the largest number of problems I fixed on
Clipertons was that coax shorting. The dielectric would melt from the
heat in the final compartment allowing the center conductor and braid
to share the same space.
73
Roger (K8RI)
> Carl
> KM1H
>
>
>
>> --
>> Vic, K2VCO
>> Fresno CA
>> http://www.qsl.net/k2vco/
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|