| To: | <Amps@contesting.com> |
|---|---|
| Subject: | Re: [Amps] 50 w stud mount zeners |
| From: | "Roy" <royanjoy@ncn.net> |
| Date: | Fri, 13 Aug 2010 12:33:12 -0500 |
| List-post: | <amps@contesting.com">mailto:amps@contesting.com> |
"6A10s are a good choice, but for a high bias tube like a GS-35b you need a lot of them - about 40. (24 VDC x .6 V per diode)." CW key up / key down regulation is not good with a string of diodes. With a dozen I measured a droop of 1-volt. With a 50 w zener it was nil. 73, Roy K6XK _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [Amps] 833A 160 meter amp Phase 2 fit-up, Gary Schafer |
|---|---|
| Next by Date: | [Amps] Why no images allowed?, Bill, W6WRT |
| Previous by Thread: | [Amps] Experience or design with IXYS RF Mosfets?, Henk Remijn PA5KT |
| Next by Thread: | Re: [Amps] 50 w stud mount zeners, Carl |
| Indexes: | [Date] [Thread] [Top] [All Lists] |