| To: | amps@contesting.com |
|---|---|
| Subject: | Re: [Amps] HV wires, back-to-back diodes, and B- wiring |
| From: | Scott Townley <nx7u@cox.net> |
| Date: | Sun, 12 Sep 2010 07:55:57 -0700 |
| List-post: | <amps@contesting.com">mailto:amps@contesting.com> |
With all this talk about B- diodes etc., I wonder what the recommended safety practice would be for an amp/supply arrangement where B- is not near ground potential; for example, a grounded-screen tetrode amplifier where B- is several hundred volts below chassis ground. Scott Townley NX7U Gilbert, AZ DM43di mailto:nx7u@cox.net http://members.cox.net/nx7u _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [Amps] WTB RG-393, Donald Fox |
|---|---|
| Next by Date: | [Amps] HV wires, back-to-back diodes, and B- wiring, Jim Thomson |
| Previous by Thread: | Re: [Amps] HV wires, back-to-back diodes, and B- wiring, Jeff Blaine |
| Next by Thread: | [Amps] HV wires, back-to-back diodes, and B- wiring, Jim Thomson |
| Indexes: | [Date] [Thread] [Top] [All Lists] |