Amps
[Top] [All Lists]

Re: [Amps] Any experiences with "powergridtube"? (YC156 hunt)

To: amps@contesting.com
Subject: Re: [Amps] Any experiences with "powergridtube"? (YC156 hunt)
From: Ian White GM3SEK <gm3sek@ifwtech.co.uk>
Reply-to: Ian White GM3SEK <gm3sek@ifwtech.co.uk>
Date: Fri, 1 Oct 2010 08:52:18 +0100
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Jim Thomson wrote:
>##  reid @ Eimac tells me that although it's stated the tube has a 6 
>min warm up, to allow a full 8 mins of warm up.   The B+  can be 
>applied simultaneously  with fil
>V.   The tube is cut off on RX anyway.   You just can't draw idle 
>current or apply drive for 8 mins.   Easiest  method is to inhibit the 
>key line for 8 mins..or use a stop watch !
>

There's one YC156 heater transformer that has its own IP address, so it 
can be activated 8 minutes before the owner arrives home.


-- 

73 from Ian GM3SEK
http://www.ifwtech.co.uk/g3sek
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>