Amps
[Top] [All Lists]

Re: [Amps] PS ideas for solid state amps

To: <dezrat1242@yahoo.com>, <amps@contesting.com>
Subject: Re: [Amps] PS ideas for solid state amps
From: "Carl" <km1h@jeremy.mv.com>
Date: Mon, 11 Oct 2010 16:06:17 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
----- Original Message ----- 
From: "Bill, W6WRT" <dezrat1242@yahoo.com>
To: <amps@contesting.com>
Sent: Monday, October 11, 2010 2:06 PM
Subject: Re: [Amps] PS ideas for solid state amps


> ORIGINAL MESSAGE:
>
> On Mon, 11 Oct 2010 09:17:52 -0400, "Tom & Martha" <mtnest@hartcom.net>
> wrote:
>
>>
>> When considering power supplies for Moderate power HF Amp's (+- 300-400W 
>> output), in class AB, requiring about 28V @ 30A, what are most guys 
>> using?
>
> REPLY:
>
> I would use two automobile batteries in series with a trickle charger.
> Be sure to fuse them properly - lots of juice there.  :-)
>
> 73, Bill W6WRT


If you live near a surplus electronics shop give them a call, old industrial 
linear supplies are going cheap. The last one I picked up about 15-16 months 
ago was a rack mounted 0-35V @ 100A for $50, in 1998 I paid $150 for the 
same PS, same store, for the company I worked for.

Its a 2 man effort to get it on the bench, about 150#.

Carl
KM1H 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>