If you can find one without it being hacked or the low band coil supports
rotted away they are still fine at 1500W.
The coil taps arent always ideal, especially for 10M and you will find many
using less turns. Id suggest using GM3SEK's spread sheet and set the taps
accordingly. The spare contact for 160M is getting hard to find so look for
one that has it.
Carl
KM1H
----- Original Message -----
From: "Lee Buller" <k0wa@swbell.net>
To: <amps@contesting.com>
Sent: Tuesday, November 09, 2010 11:14 AM
Subject: [Amps] 850 and 852
>
> What are your thoughts about using a B&W 850 or 852 in an amp today? Like
> with
> a Russian tube?
>
> Lee K0WA
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|