Remove tubes, replace fuse, turn on, no blow? bad tube. Blow? shorted
diode in PS or filter cap. B+ short to ground. Thats about it unless safety
choke is shorted from shorted blocking cap.
In a message dated 1/3/2011 3:42:10 A.M. Eastern Standard Time,
w1ctn@yahoo.com writes:
To all:
When I turned the amp on today it blew the fuses.
An ideas where to start looking for the culprit part/parts?
73
Dave
W1CTN
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|