Amps
[Top] [All Lists]

Re: [Amps] AL-811 & 572's

To: "Mitch Cox" <ww4cox@embarqmail.com>, "Thomas F. Giella NZ4O" <nz4o@tampabay.rr.com>, "amps @ COL" <amps@contesting.com>
Subject: Re: [Amps] AL-811 & 572's
From: "Carl" <km1h@jeremy.mv.com>
Date: Sat, 22 Jan 2011 12:13:40 -0500
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Im sure many of us would disagree with many of those IMD specs. The 572B is 
off by at least 4-5dB.

Also realize that the Svetlana versions are using smaller anodes and non 
hardened glass. They melt down rather easy during a run away parasitic.

The Chinese at least spec the Pd at 125W and the hardened glass is thinner 
than Cetron.

Carl
KM1H


----- Original Message ----- 
From: "Mitch Cox" <ww4cox@embarqmail.com>
To: "Thomas F. Giella NZ4O" <nz4o@tampabay.rr.com>; "amps @ COL" 
<amps@contesting.com>
Sent: Saturday, January 22, 2011 7:57 AM
Subject: Re: [Amps] AL-811 & 572's


> Here you go;
> http://www.mgs4u.com/RF-Microwave/TriodeTubeDataCharacteristicChartbyW6LEG.pdf
>  ----- Original Message ----- 
>  From: Thomas F. Giella NZ4O
>  To: amps @ COL
>  Sent: Saturday, January 22, 2011 7:53 AM
>  Subject: Re: [Amps] AL-811 & 572's
>
>
>  Thanks for the input guys. I'm aware of the limitations of the power 
> supply
>  on the AL-811. I was looking for performance information about the 572B 
> tube
>  itself.
>
>  73 & GUD DX,
>  Thomas F. Giella, NZ4O
>  Lakeland, FL, USA
>  nz4o@tampabay.rr.com
>  John 3:16 <><
>
>  NZ4O Solar Space Weather And Geomagnetic Data Archive: 
> http://www.nz4o.org
>  NZ4O Daily LF/MF/HF/6M Radiowave Propagation Forecast:
>  http://www.solarcycle24.org
>
>
>  ----- Original Message ----- 
>  From: "Thomas F. Giella NZ4O" <nz4o@tampabay.rr.com>
>  To: "amps @ COL" <amps@contesting.com>
>  Sent: Friday, January 21, 2011 12:50 PM
>  Subject: [Amps] AL-811 & 572's
>
>
>  >I have an AL-811 running 572B's instead of 811's. The manual says for 
> RTTY
>  > mode to use a maximum of 150 ma on the grid and 400 ma on the plate for
>  > the
>  > 811's.
>  >
>  > What would be the maximum grid and plate current that I could use on 
> the
>  > 572B's on RTTY?
>  >
>  > 73 & GUD DX,
>  > Thomas F. Giella, NZ4O
>  > Lakeland, FL, USA
>  > nz4o@tampabay.rr.com
>  >
>  > NZ4O Solar Space Weather And Geomagnetic Data Archive: 
> http://www.nz4o.org
>  > NZ4O Daily LF/MF/HF/6M Radiowave Propagation Forecast:
>  > http://www.solarcycle24.org
>  >
>  >
>  > _______________________________________________
>  > Amps mailing list
>  > Amps@contesting.com
>  > http://lists.contesting.com/mailman/listinfo/amps
>
>  _______________________________________________
>  Amps mailing list
>  Amps@contesting.com
>  http://lists.contesting.com/mailman/listinfo/amps
>
>
>  -----
>  No virus found in this message.
>  Checked by AVG - www.avg.com
>  Version: 10.0.1191 / Virus Database: 1435/3392 - Release Date: 01/20/11
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>