I may have some surplus of the below transformer if anyone is interested
contact me off list.
It should work great for a pair of 3cx800's or an 8877 (voltage doubler) and
possibly other tubes.
TRANSFORMER # Q-4010327-C
TRANSFORMER # Q-4010327-C
Made for CFR INDUSTRIES
page 1 of 1
-------------------------------------------------------------------------------------------------
LEADS SCHEMATIC LEADS
S#14/8" 0V WHITE 1 WHITE 0V S#22/8"
UO = 1393.7V RMS
S#14/8" 115V YELLOW 2 WHITE 1350V RMS S#22/8”
UO = 1761.5V RMS
S#14/8" 0V ORANGE 3 WHITE 1710V RMS / 1.2A RMS* S#22/8”
S#14/8" 115V BLACK
PRIMARIES ARE INSIDE A SLEEVE.
Primaries must be connected together in series or in parallel.
LEADS: S=Multistranded wire. Length tolerance: +/- 1/2".
Manufacturing tolerance is +/- 3%.
*50% DUTY CYCLE.
-----------------------------------------------------------------------
NOMINAL SUPPLY: 115/230V +/-10%
RATED PRIMARY CURRENT: 15.4/7.7A
RATED FREQUENCY: 60 Hz
TEMP. RISE AT RATED LOAD: 60ºC
DIMENSIONS/WEIGHT: MOUNTING: CORE DATA:
OD = 7.1" POTTED CENTER CORE # 901797
H = 3.9" FLAT BOTTOM CORE LOSS = 6.8 W
WEIGHT = 23.4 LBS. HOLE DIAMETER = 3/8” NO-LOAD CURRENT = 77 mA
Dimensions stated above are nominal. Tolerance is 10%.
OTHER SPECIFICATIONS: Transformer meets UL 506 and CSA C22.2 No. 66 standards.
ROHS
compliance. Class B insulation. Primary leads to be UL 1015 wire and secondary
leads to be UL
3239 wire rated 10kVdc.
-------------------------------------------------------------------------------------------------
Transformer meets UL 506 and CSA C22.2 No. 66 standards. ROHS
compliance. Class B insulation. Primary leads to be UL 1015 wire and secondary
leads to be UL
3239 wire rated 10kVdc.
-------------------------------------------------------------------------------------------------
Label:
Transformer # Q-4010327-C
SPEC DATE: 01/21/11 Made for CFR INDUSTRIES
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|