"I thought the FCC had changed the rules about 10 meters on commercial
ham amps, yet I see that Ameritron still lists their amps 1.8 though 21
MHz with 28 MHz on the export models. Why? 73 Roger (K8RI)"
While the FCC now permits amps to have 10 meter coverage, the amps cannot
operate on the CB band. However, a ham can modify his own equipment. Since
current Ameritron amps don't have the ability to determine the frequency
being transmitted and amplified (i.e., no internal frequency counter), the
amp cannot be shipped if it is capable of operating on the CB band.
However, since a ham can modify his own equipment, the user can install the
10/12M LPF or cut a wire. Just a way around the rules. Most new
solid-state amps (THP, SPE, Elecraft) have internal frequency counters that
keep the amp from amplifying signals out of the ham bands.
Phil - AD5X
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|