Amps
[Top] [All Lists]

Re: [Amps] What to buy?

To: "Jim Thomson" <jim.thom@telus.net>, <amps@contesting.com>
Subject: Re: [Amps] What to buy?
From: "Jim W7RY" <w7ry@inbox.com>
Reply-to: Jim W7RY <w7ry@inbox.com>
Date: Sat, 5 Feb 2011 11:27:07 -0800
List-post: <amps@contesting.com">mailto:amps@contesting.com>
>
> ## I have given up on torroids  for tank coils on the low bands. I have 
> found some small diam, edge
> wound ribbon coil stock that works the best for low band work.  3/8" edge 
> wound ribbon [.072" thick]
> is the same as .28"  tubing for current handling.   1/4" ribbon [ also 
> .072" thick]  is ample in most cases
> and is the same as .2" OD tubing.   A friend also gave me a bunch of air 
> dux.. that uses 8 ga wire.. and the
> wire was copper..and not the usual tinned material.  These are things of 
> beauty. I didn't know you could
> get coil stock in 8 ga wire.
>
> Jim   VE7RF


So where do you buy this stuff?  I need some for my 8877 project. I'm not 
happy with the 80 meter toroid getting so hot. I run a lot of RTTY.  The amp 
runs toroids on 80 and 160. The rest of the tank is 1/4" and 3/16" tubing 
which works just fine on 10-40 meters.

73
Jim W7RY


 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>