I used a 78 for the first time this past weekend. Quit ehte machine.
The bulb in the left (Plate) meter is out. Is hte bulb in and of itself
replaceable, or do I need a new meter movement.
If the later is the case, or, for that matter, if I can get inside the meter
itself, *and* if I do the shunt mod, is there an appropriately scaled
meter or label available?
Also, the buttons are colored, but should they be lit, too?
Thanks,
Eric W3DQ
Washington, DC
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|