Amps
[Top] [All Lists]

Re: [Amps] SB200 diodes

To: "Kathy Bookmiller" <wb2aio@yahoo.com>, <amps@contesting.com>
Subject: Re: [Amps] SB200 diodes
From: "Carl" <km1h@jeremy.mv.com>
Date: Fri, 25 Mar 2011 19:54:31 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
An NCL-2000 also Kathy? Now thats a mighty fine amp but I have an extreme 
personal bias (-;

Carl
KM1H


----- Original Message ----- 
From: "Kathy Bookmiller" <wb2aio@yahoo.com>
To: <amps@contesting.com>
Sent: Thursday, March 24, 2011 4:34 PM
Subject: [Amps] SB200 diodes


Thanks to everyone for their replies. I'm going to order them from Mouser 
and replace them all as that is the consensus of the replies I received both 
on-list and off. Did take a run over to my local RS store and they had some 
that were close to the 1n5408s in spec, but only a 3 pack of them, so will 
order them all from Mouser. That seems to be the norm for RS. It seems about 
every time I go in there for some parts, they'll have them in those drawers 
in the back, but only one or none is inside the compartment.
While waiting for them to show, maybe I'll finally get into my old NCL2000 
that is loosing it's drive and has been sitting on the repair bench for a 
year:) That is how I ended up buying the SB200 when it showed up on 
Craigslist here last summer, while waiting for a new set of tubes to show 
up.
So I'll spend the weekend looking for the odd band fill in the WPX contest 
and checking the capacitors in the SB200 and cleaning off the board of the 
old diodes.
73,
Kathy






_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>