Thank you for your comments!
The problem is that the schematic is UGLY and drawn in pencil. With lots of
erasures! Also
the circuit is based on what parts I happened to have, and also is CW only
(unless you
find the sound of class-C amplified SSB helps clear a frequency in contests). I
do intend
to add pics of the back and the bottom.
On 3/30/2011 4:45 PM, Paul Christensen wrote:
> Vic's 2 X 813 amp gets my vote for the "coolest-looking" amp ever made.
> Check it out on his website and see if you don't agree. Classic round
> metering, jeweled lamps, RCA knobs, heavy-duty toggle switches, etc. How
> about adding some pics of the back and schematic, Vic?
>
> Paul, W9AC
>
> ----- Original Message -----
> From: "Vic K2VCO"<vic@rakefet.com>
> To:<amps@contesting.com>
> Sent: Wednesday, March 30, 2011 7:33 PM
> Subject: Re: [Amps] 813 Amplifier Article
>
>
>> Looks good to me.
>>
>> If you have more tubes than you need, I'm accumulating NOS ones to build
>> yet another 813
>> amplifier.
>>
>> I would like to build one with 4 of them this time!
>>
>> On 3/30/2011 4:22 PM, Bill Smith wrote:
>>> Is this design still ok for the 813. It was written long ago I think.
>>> http://jlandrigan.com/files/813%20Grounded%20Grid%20Amplifier/GE%20Ham%20News%20813%20GG%20article.pdf
>>>
>>> I have a bunch of these tubes in hand.
>>> 73,
>>> Bill Smith KO4NR
>>
>> --
>> Vic, K2VCO
>> Fresno CA
>> http://www.qsl.net/k2vco/
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
--
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco/
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|