That last digest had a large amount of duplication and was hard to read
through, but your comment on RS2014, Bill, indicates that the tubes were not
Eimac but Seimens tubes, versions of the same 4CX5000A.
John
K5PRO
> Message: 1
> Date: Tue, 7 Jun 2011 20:20:08 -0400
> From: "Fuqua, Bill L" <wlfuqu00@uky.edu>
> Subject: Re: [Amps] Any designs for 4CX1000A on 2m
> To: "jtml@vla.com" <jtml@vla.com>, "amps@contesting.com"
> <amps@contesting.com>
> Message-ID:
> <60374AAC83C8764A98809A65BED321CB140FC97EDB@EX7FM04.ad.uky.edu>
> Content-Type: text/plain; charset="us-ascii"
>
> I think the number on them is RS2014.
> 73
> Bill wa4lav
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|