I would think the toroids and the coil is the same since the 3 tubes are
similar and on 160 nothing is that critical. The toroid itself is likely a
Micrometals #2 mix. Go to Amidon and get one of the same size, use Scotch 27
tape and Teflon wire.
Carl
KM1H
----- Original Message -----
From: "Mike & Becca Krzystyniak" <k9mk@flash.net>
To: "'Amps Amps'" <amps@contesting.com>
Sent: Wednesday, August 17, 2011 10:55 AM
Subject: [Amps] Anyone have a 160M Tank Toroid for a Alpha PA70 or PA70V?
> Already talked with the folks at Alpha with little help, so I'm trying
> here.
>
> Does anyone have a 160M tank coil (the wound toroid) from an old Alpha
> PA70 or PA70V they want to sell?
>
> Also, would anyone know if the 160M tank toroid for the PA70 series and
> the 77 series amps might be the same?
>
> Thanks in advance.
>
> 73's Mike
>
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1392 / Virus Database: 1520/3840 - Release Date: 08/17/11
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|