I still need a 1500T to complete my collection.
I have every one from the 15E to the 2000T but not the 1500T.
73
bill wa4lav
Largest tube in collection is a 3CV200,000A7
But has grid short.
If copper keeps going up may scrap it. It is worth more
in just copper than as a core for rebuild.
________________________________________
From: amps-bounces@contesting.com [amps-bounces@contesting.com] On Behalf Of
Roger (sub1) [sub1@rogerhalstead.com]
Sent: Saturday, August 20, 2011 10:18 PM
To: Carl
Cc: amps@contesting.com
Subject: Re: [Amps] Any new tube research?
On 8/20/2011 9:23 AM, Carl wrote:<snip>
>
> Aww, you poor fella, I feel your pain (-;
>
Yah...decisions, decisions, decisions...
> The 6C21's (pulse rated 450T family) in one of my AM amps are 12.625"
> tall not counting the heat radiating
I think I've mentioned, my first high power amp was a 6C21. I saw a
pair of them running PP to a *vertical* tuned line on 6-meters. Now that
was impressive.
> plate cap. At least the 304TL modulators are shorter.
A LOT shorter <:-))
> Real amps belong in racks and not on the desk....
That's a problem when you don't have any floor space for racks.
As my wife says...I suffer from TMS or Too Much... ahhhh... Stuff!
I think that was mentioned a few weeks back when the paramedics were
trying to roll me down the aisle in front of the work bench. They
totaled my office chair. At least they didn't break anything important.
73
Roger (K8RI)
> Carl
> KM1H
>
>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|