| To: | amps@contesting.com |
|---|---|
| Subject: | Re: [Amps] Liquid cooling |
| From: | Martin A Flynn <maflynn@theflynn.org> |
| Reply-to: | maflynn@theflynn.org |
| Date: | Mon, 22 Aug 2011 12:58:14 -0400 |
| List-post: | <amps@contesting.com">mailto:amps@contesting.com> |
On 8/22/2011 11:21 AM, Larry wrote: > What would be the best choice of metal for a cooler? My first attempt at liquid cooling used a plate chiller from a beer system (stainless steel tube embedded in an aluminum block). The second attempt used a machined aluminum block (cross drilled and plugged). The hopefully last version is a foundry cast cooling block with 3/8 stainless tubing and enough depth to machine to match a FreeScale 50V LDMOS and prototype board. (power supply is a -48v / 100 A telco rectifier and a 48V motor and pump head) _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [Amps] MRFE6VP Datasheet, jeff millar |
|---|---|
| Next by Date: | Re: [Amps] Ruberized silicon sheet, Mike & Becca Krzystyniak |
| Previous by Thread: | Re: [Amps] Liquid cooling, Carl |
| Next by Thread: | Re: [Amps] Liquid cooling, Manfred Mornhinweg |
| Indexes: | [Date] [Thread] [Top] [All Lists] |