good morning guys,
i have a 6 meter project going with a gs-35. i would like to use my mfj259 on
the anode and cathode. i have read all i can find as usual but still don't
understand how they come up with the beginning operating parameters. really the
only known one i have is plate voltage of 2800v.
my current output is:
2450 full load
80w drive
1.2ma plate
126ma grid
1000 out
this does not seem to be right nor very efficient. since i have learned from
yall how to calculate efficency my life has been hell. HIHI 30 to 45 percent
just isn't enough.
Carey, kc5gtt
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|