Early Ameritrons used a steel clamshell, I guess shipping weight vs aluminum
cost won out however the baseplate of a recent AL-811 I worked on was steel.
I know that because I had to drill new holes for the replacement
transformer.
Carl
KM1H
----- Original Message -----
From: "Rob Stampfli" <rob@cboh.org>
To: "Gary K9GS" <garyk9gs@wi.rr.com>
Cc: "AMPS Mailing List" <amps@contesting.com>
Sent: Wednesday, November 09, 2011 3:43 PM
Subject: Re: [Amps] Ameritron Front Panel Material?
> On Wed, Nov 09, 2011 at 07:49:47AM -0600, Gary K9GS wrote:
>> Can someone that owns an Ameritron amp confirm if the front panel is
>> steel or aluminum?
>
> I'm not sure what metal it is (or if it is even metal), but a magnet
> won't stick to the front panel of my AL-80B, so it isn't steel.
> FWIW, the top/side cover and back are aluminum, but the screws are
> ferrous.
>
> Rob / KD8WK
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1411 / Virus Database: 2092/4006 - Release Date: 11/09/11
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|