Amps
[Top] [All Lists]

Re: [Amps] HV cable for Kings Electronics 1705-14

To: "Samir Popaja" <7s7v@comhem.se>, <amps@contesting.com>
Subject: Re: [Amps] HV cable for Kings Electronics 1705-14
From: "Jim W7RY" <jimw7ry@gmail.com>
Reply-to: Jim W7RY <jimw7ry@gmail.com>
Date: Sun, 13 Nov 2011 07:11:40 -0800
List-post: <amps@contesting.com">mailto:amps@contesting.com>
I'm running 4KV through RG59 and SHV connectors. Works fine.

73
Jim W7RY


--------------------------------------------------
From: "Samir Popaja" <7s7v@comhem.se>
Sent: Sunday, November 13, 2011 2:51 AM
To: <amps@contesting.com>
Subject: [Amps] HV cable for Kings Electronics 1705-14

> Hello,
>
>
>
> I have SHV connectors from
> <http://datasheet.octopart.com/1705-14-Kings-Electronics-datasheet-8628306.p
> df> Kings Electronics 1705-14  and would like to use between HV PSU 
> 3KV/1.2A
> and RF Deck on 2m.
>
>
>
> According to datasheet I need to use RG59  coaxial cable???  Is any other
> cable which fit in this connector and it's good for 3KV???
>
>
>
> Thanks
>
>
>
> Samir, SM7VZX
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>