Carl wrote:
> - Grounded grids should be grounded for RF, not a pretty photo. With an
> insulated washer between socket and chassis each tube is grounded by the
> screw head only ON TOP OF THE chassis...in the plate compartment... and
> elsewhere as well to multiple points below.
Well the grid bonding straps are not just hooked to the socket screws. If
you know the underside of the TL-922, there are screws with long pins on the
ends,
that are screwed through the chassis. The copper straps are also soldered to
these screws/pins too. Look at the bypass caps on the filament choke. They
are also soldered to these screws/pins.
73
Jim W7RY
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|