| To: | "ka4inm@tampabay.rr.com" <ka4inm@tampabay.rr.com>, amps <amps@contesting.com> |
|---|---|
| Subject: | Re: [Amps] IMD |
| From: | "Fuqua, Bill L" <wlfuqu00@uky.edu> |
| Date: | Sun, 8 Jan 2012 14:17:56 -0500 |
| List-post: | <amps@contesting.com">mailto:amps@contesting.com> |
From: amps-bounces@contesting.com [amps-bounces@contesting.com] On Behalf Of
Ron Youvan [ka4inm@tampabay.rr.com]
Sent: Sunday, January 08, 2012 9:35 AM
To: amps
Subject: Re: [Amps] IMD
This "different delay for different frequencies" is called "group delay."
It is something that messes up dial up modems. (so you don't get 56 kB/s)
______________________________________________________________________________________________
Constant delay at all frequencis is also referred to as " linear phase
response". That is if all frequencies
have the same delay then the phase shift is linear. 1kHz phase output relative
to input could
be -30 degrees but 2kHz would be -60 degrees and so on. but only if the delay
is uniform across all
frequencies.
73
Bill wa4lav
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [Amps] FL 2100B OUTPUT PROBLEMS, RAY FRIESS |
|---|---|
| Next by Date: | Re: [Amps] IMD, Dan Mills |
| Previous by Thread: | Re: [Amps] IMD, Ron Youvan |
| Next by Thread: | Re: [Amps] IMD, Jim Brown |
| Indexes: | [Date] [Thread] [Top] [All Lists] |