Amps
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[Amps] K7RLD amp

from [Paul Kraemer] [Permanent Link][Original]
To: "AMPS" <amps@contesting.com>
Subject: [Amps] K7RLD amp
From: "Paul Kraemer" <elespe@lisco.com>
Date: Wed, 25 Jan 2012 16:00:59 -0600
List-post: <amps@contesting.com">mailto:amps@contesting.com> 
Anyone familiar with the K7RLD amp using two 4CX250 in cathode drive with 
the grid connected to cathode through a 100 ohm resistor?
Any idea how much drive is required for full output?
Paul K0UYA 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
  • [Amps] K7RLD amp, Paul Kraemer <=
Previous by Date:  Re: [Amps] 3CX800A7 Grid Current Problem, Carl
Next by Date:  Re: [Amps] 3CX800A7 Grid Current Problem, Paul Elliott
Previous by Thread:  [Amps] 3CX800A7 Grid Current Problem, Paul Elliott
Next by Thread:  [Amps] Need 2 Door-Knob caps, Bob KD7YZ
Indexes:  [Date] [Thread] [Top] [All Lists]