Flexible dryer exhaust hose works fine and its available in aluminum or Hi
temp plastic. Its Light weight and easy to handle. You can also use 3" shop
vacuum cleaner hose.
73s de Jim
W5IFP
> -----Original Message-----
> From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com]On
> Behalf Of Mr Mike
> Sent: Tuesday, March 20, 2012 2:49 PM
> To: amps@contesting.com
> Subject: [Amps] Ducting Suggestion
>
>
> SLOOOOOOwwwllly workeing on a single gs-35b amp.
>
> I puchased a blower that is rated at 110 cfm @ .5" SP
>
> I am planning to make the HV p/s a seperate unit and am toying
> with the idea of remoting the blower as well, to reduce noise.
> In this design there would be a 3" diam flexible tube running
> from P//S blower cabinet to remote amp chassis, about 6 feet long.
>
> I know flexible exhaust pipe would work, ants certainly tough
> enough, but has anyone any more aesthetically pleasing ideas?
>
> AC2Q
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|