Amps
[Top] [All Lists]

Re: [Amps] Chinese Caps Defective @ RF

To: <audioguy@q.com>
Subject: Re: [Amps] Chinese Caps Defective @ RF
From: "Carl" <km1h@jeremy.mv.com>
Date: Sat, 24 Mar 2012 18:41:07 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Ameritron and others seem to get by with Teflon disc caps as Load padders 
and plate blockers in 2000-2500W amps. I havent looked at prices in quite 
awhile.

Carl


----- Original Message ----- 
From: "Jim Barber" <audioguy@q.com>
Cc: <amps@contesting.com>
Sent: Saturday, March 24, 2012 5:39 PM
Subject: Re: [Amps] Chinese Caps Defective @ RF


> Has anyone done RF testing on the big doorknobs used in laser power
> supplies? Many of the 20-40KV caps sold on eBay come from surplus laser
> gear and were not originally sold for RF use.
>
> It would be interesting (to me at least) to run "a few" amps of RF
> current at both 1.8 and 30mhz through one of the big TDK/Murata units
> and see what happens. Relatively speaking, you don't need much current
> handling capacity for plate blocking use, but padding 160m tank circuits
> is another matter.
>
> 73,
> Jim N7CXI
>
> On 3/24/2012 7:07 AM, Carl wrote:
>> While new HEC prices are a bit ridiculous there is enough high quality 
>> used
>> doorknobs around plus the Russian surplus RF caps are also excellent.
>>
>> I passed over those Chinese caps as a bad deal years ago once I found the
>> actual specs.
>>
>> Carl
>> KM1H
>>
>>
>> ----- Original Message -----
>> From: "Rob Atkinson"<ranchorobbo@gmail.com>
>> To:<amps@contesting.com>
>> Sent: Saturday, March 24, 2012 9:17 AM
>> Subject: Re: [Amps] Chinese Caps Defective @ RF
>>
>>
>>> You have a lot of circulating current through blocking caps on 10 m.
>>> For a critical application, I'd stick with a known manufacturer like
>>> HEC where you can see a range of specifications and test data.  You do
>>> pay more, but you only have to pay one time.   "off-brand" caps can be
>>> used in homebrew antenna tuners where it is okay to um, experiment.
>>>
>>> The dielectric temp. constant is one thing to consider and indeed, the
>>> caps should be class 1.   The other factor is the external temperature
>>> environment.  For example, are the caps mounted near a tube that
>>> throws off a lot of heat.   A good manufacturer will supply an
>>> environmental  temperature range spec. that the cap has to stay within
>>> to keep its value.
>>>
>>> 73
>>>
>>> Rob
>>> K5UJ
>>> _______________________________________________
>>> Amps mailing list
>>> Amps@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/amps
>>>
>>>
>>> -----
>>> No virus found in this message.
>>> Checked by AVG - www.avg.com
>>> Version: 10.0.1424 / Virus Database: 2113/4891 - Release Date: 03/24/12
>>>
>>
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1424 / Virus Database: 2113/4891 - Release Date: 03/24/12
> 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>