My emerging project amp (a reconstituted Alpha 76A that is missing it's tank
circuit) would normally require a 6-position band switch, but the switches I
have (one and a spare) are 5-position. I'm thinking of designing the tank
circuit to share 15 and 10M on one switch position, by having the PI network
designed for around 24 MHz, on the theory I could use it on 21 and 28 MHz. I
don't plan operate 24 MHz itself with the amp. Losing a bit of efficiency on 21
or 28 MHz isn't a concern. Anything else I should be concerned with?
Thanks,
73 Dave WB0GAZ wb0gaz@yahoo.com
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|