Mine runs just fine.
On 4/30/12 2:03 PM, Carl wrote:
> Palstar has a high rate of failures. They couldnt make an amp either.
> ----- Original Message -----
> From: "W2XJ"<firstname.lastname@example.org>
> Sent: Monday, April 30, 2012 12:52 PM
> Subject: Re: [Amps] Tubes vs. Solid State (was) Expert Amps 2K-FA: Any
> Opinions ?
>> Look at Palstar.
>> On 4/30/12 3:39 AM, Rob Atkinson wrote:
>>> Every one of those automatic tuners I have ever seen look like they'd
>>> melt down with a 300 or 400 w. carrier.
>>> Bob, I decided you are completely correct about solid state. If you
>>> happen to have any excess BC500Js, BC1Fs, BTA-1s, WeCo rigs, even a
>>> Sparta 701, pse let me know and I'll come get it or them : )
>>> On Mon, Apr 30, 2012 at 12:22 AM, W2XJ<email@example.com> wrote:
>>>> That is why a good automatic antenna tuner should be used.
>>>> On 4/29/12 8:37 PM, Roger (K8RI) wrote:
>>>>> The SS amp would let me cover the whole band without retuning, but it
>>>>> would roll back the output power as the SWR went up. The tube amp does
>>>>> not roll back the output. IIRC the SS amp was down about 200 watts at
>>>>> 1.2:1. It's been a couple of years. 73 Roger (K8RI)
>>> Amps mailing list
>> Amps mailing list
>> No virus found in this message.
>> Checked by AVG - www.avg.com
>> Version: 10.0.1424 / Virus Database: 2411/4969 - Release Date: 04/30/12
> Amps mailing list
Amps mailing list