Amps
[Top] [All Lists]

Re: [Amps] Fwd: Re: soldering vs crimping

To: k7fm@teleport.com, hwardsil@gmail.com, amps@contesting.com
Subject: Re: [Amps] Fwd: Re: soldering vs crimping
From: TexasRF@aol.com
Date: Thu, 3 May 2012 22:09:17 -0400 (EDT)
List-post: <amps@contesting.com">mailto:amps@contesting.com>
First liar has no chance in this group! I was going to tell my story of  
using a 10 penny nail heated on my mothers gas stove for a soldering iron but  
that just seems too tame!
 
73,
Gerald K5GW
 
 
 
 
In a message dated 5/3/2012 8:50:48 P.M. Central Daylight Time,  
k7fm@teleport.com writes:

"You had  a razor blade?  We had to gnaw off the jacket and then bite  
through
the individual strands one-by-one!  Then we had to rub the  solder with a
stick until it melted!"

You had solder?  We had  to go through the trash and find discarded 
toothpaste containers and use  the lead in them or melt the solder in 
discarded tin  cans.

73,  Colin  K7FM  

_______________________________________________
Amps mailing  list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>