Something else to keep in mind is core saturation. When this happens,
primary current draw will rise very quickly.
73,
bob
N2oam
----- Original Message -----
From: "Steve Bookout" <steve@dx4win.com>
To: <amps@contesting.com>
Sent: Tuesday, June 12, 2012 9:49 AM
Subject: [Amps] Input voltage on HV transformer
> Hello all,
>
> Other than the obvious higher output voltage, anything I need to be aware
> of if I put 240 v on a transformer intended for 220 v.
> I'm sure that some point voltage breakdown between windings is an issue,
> but would not expect that to be an issue at only ~110% input voltage.
>
> 73 de Steve, NR4M
>
> " I'd rather have a 'bottle in front of me', than a 'frontal lobotomy' "
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|