Not sure. But It measures a single dit at 60 WPM CW just fine.
73
Jim W7RY
-----Original Message-----
From: Joe Subich, W4TV
Sent: Monday, August 13, 2012 6:12 PM
To: amps@contesting.com
Subject: Re: [Amps] ALC Overshoot FTDX-5000
What is the time constant of the Powermaster? Then only clear way to
measure the sub 5 ms spikes is with a scope.
73,
... Joe, W4TV
On 8/13/2012 8:56 PM, Peter Voelpel wrote:
> That is no ALC overshoot, but the breathing power supply
>
> 73
> Peter, DJ7WW
>
> -----Original Message-----
> From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
> Behalf Of Jim W7RY
> Sent: Dienstag, 14. August 2012 02:46
> To: AMPS
> Subject: [Amps] ALC Overshoot FTDX-5000
>
> I thought you would like to know what a friend of mine found on his new
> (less than 1 year old) FTDX-5000 for ALC overshoot...
>
> Setting the power out to 25.5 watts the overshoot reached 26.9 amounting
> to
> 1.4 watts overshoot Both cw and rtty came up the same.
>
>
> Using 101 watts the overshoot reached 104
>
> He used a Powermaster and a dummy load.
>
> 73
> Jim W7RY
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|