ORIGINAL MESSAGE:
On Sat, 25 Aug 2012 08:58:36 -0500, Gary wrote:
>hello all,
>
>so i have a 2m gs-35b running 4100 no load on the plate. i have a 30v 50w
>zener for bias.
when keyed it gives 28v of bias but it also gives .500 mils of idling current.
with a second zener in series at 58v it drops down to 100 mils.
>
>what am i missing? i have checked the meter against my digital meter. they
>read the same.
>
>Carey, kc5gtt
>_____________
REPLY:
First of all, no load voltages are meaningless. What is the loaded voltage?
I assume the decimal point in front of the 500 mils is a typo, right?
Without digging out the curves, I'd say the numbers look about right. Why do you
think something is wrong?
73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|