| To: | dhallam@knology.net, Charles Harpole <k4vud@hotmail.com> |
|---|---|
| Subject: | Re: [Amps] Silver solder |
| From: | peter chadwick <g8on@fsmail.net> |
| Reply-to: | g8on@fsmail.net |
| Date: | Mon, 27 Aug 2012 15:14:18 +0200 |
| List-post: | <amps@contesting.com">mailto:amps@contesting.com> |
There are two things called 'silver solder', and they are very different. There is a 'brazing' type alloy, melting at round 600 to 700 deg C, depending on its exact formulation, and there is a 'soft solder' of tin, lead and silver (and maybe some other stuff) melting around 180 to 250 deg C, depending on alloy. One needs to be clear about which is meant. 73 Peter G3RZP _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [Amps] Silver solder, David C. Hallam |
|---|---|
| Next by Date: | Re: [Amps] Transformer guess?, Carl |
| Previous by Thread: | [Amps] urban myth and transmitting tubes, Bill Fuqua |
| Next by Thread: | Re: [Amps] Solder flux, Colin Lamb |
| Indexes: | [Date] [Thread] [Top] [All Lists] |