Amps
[Top] [All Lists]

Re: [Amps] New 4-1000 Tubes ?

To: "Alex Gavva" <ur4ll@ur4ll.net>, <amps@contesting.com>
Subject: Re: [Amps] New 4-1000 Tubes ?
From: "Hsu" <hsu4qro@gmail.com>
Date: Mon, 7 Jan 2013 22:32:17 +0800
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Why few amp manufacturer use GU-81M,?it is cheap and rugged.


-----原始邮件----- From: Alex Gavva
Sent: Sunday, January 06, 2013 5:02 PM
To: Carl
Cc: amps@contesting.com
Subject: Re: [Amps] New 4-1000 Tubes ?

Hello Carl,

You wrote 5 января 2013 г., 22:30:46:

It only has a 500W anode dissipation altho without forced air cooling.
Sockets arent that common and look poorly made?
Very similar to the QB5/1750 which conveniently fits a 4-1000A socket and
are often available in the US as a few BCB transmitters used them.

The GU-81M is also similar, and sockets seem to be more available but
expensive.

They all make excellent AM modulators (-;

Carl
KM1H

Thank  you for very useful notes. GU46 were rare used here because of
we  good  choice  of  another  cheap  tubes. I know a few designs with
1-2pcs of  GU46,  1 tube is able run 500-1000W, but better 500W for its long
life. It is not a big problem to find these tubes here, but sockets is
not easy to find. Local people try to make these sockets, they are not
masterpiece of course, but they work.

GU81m can be used of course, it is cheap, its socket is not a problem
(my  socket  cost  $35ea,I think it is not expensive). Sometimes it is
used without original electrodes,this make it much compact. You can
watch  plenty of pictures GU81m with sockets and without electrodes if
you google GU81m and then open the first topic.




Dr Alex Gavva   QRO Parts Site: http://www.ur4ll.net
UR4LL
KO70XG          mailto:ur4ll@ur4ll.net

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
<Prev in Thread] Current Thread [Next in Thread>