Amps
[Top] [All Lists]

Re: [Amps] Chimney Material

To: Paul <w8aef@q.com>
Subject: Re: [Amps] Chimney Material
From: L L bahr <pulsarxp@embarqmail.com>
Date: Fri, 1 Mar 2013 12:37:57 -0500 (EST)
List-post: <amps@contesting.com">mailto:amps@contesting.com>
McMaster-Carr sells it as I have purchased it there.  This is the same stuff 
used by Alpha Labs in there 78 amp.  (I needed some to convert the amp to 
3CX800A7 tubes).

Lee, w0vt

----- Original Message -----
Commercial grade Silicone.

I purchased .125" x 12.00" x 12.00" several years ago from Rubber SheetRoll, 
Shippensburg, PA

http://www.rubbersheetroll.com/silicone_rubber.htm

When glueing you do have to clamp the joint for several hours.

de Paul, W8AEF

-----Original Message----- 
From: Joseph W. Morgan
Sent: Friday, March 01, 2013 7:10 AM
To: amps@contesting.com
Subject: [Amps] Chimney Material

What are the sheets of red material that I see in some amps wrapped around
the tubes as chimneys?



Anyone got a 7.5 volt 75 amp filament transformer?



73, Joe

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>