Just don't connect the plate caps while doing this gettering. Fern
----- Original Message -----
From: "Rick Stealey" <rstealey@hotmail.com>
To: "john starr001" <jstarr001@hotmail.com>; <amps@contesting.com>
Sent: Saturday, March 30, 2013 8:33 AM
Subject: Re: [Amps] Alpha 87A - Gettering NOS 3CX800A7's
> If they need gettering, putting full HV on them will cause them to arc, by
> definition.
> Maybe you could put a large value resistor in the HV lead temporarily and see
> if they can take it.
>
> Rick K2XT
>
>
>
>
> _______________________________________________
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|