Re: [Amps] Cable shielding and grounding paper

[Larry Benko <xxw0qe@comcast.net>]

Joe,

Another very interesting source of EMI information is 
http://www.compliance-club.com <http://www.compliance-club.com/> which 
you need to join (free) to view their archives.  For example look at
http://www.compliance-club.com/archive/Old_Archive/index.html and 
specifically 
http://www.compliance-club.com/archive/Old_Archive/010327.html and 
http://www.compliance-club.com/archive/old_archive/010422.htm
There has been an enormous amount of research done in this field but it 
is not always easy to find.
73,
Larry, W0QE

On 6/8/2013 9:28 AM, Joe Subich, W4TV wrote:
> It is a shame that all of the study was done with a common ground plane
> and unbalanced connections.  In effect, it is most applicable to the
> connections between separate shielded modules within a single device,
> not when interconnecting separate devices that lack a large common
> base plate/chassis.   Still, the effectiveness of twisted pair with
> the return bonded to the chassis at the connector was demonstrated
> very clearly.
>
> 73,
>
>    ... Joe, W4TV
>
>
> On 6/8/2013 10:34 AM, Larry Benko wrote:
> > http://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20090030527_2009031335.pdf 
> >
> >
> > The above paper shows noise measurements made from .01 to 400 MHz for
> > several cable configurations including the classic "pin 1".
> >
> > This is more interesting to me than arguing over naming issues.
> >
> > 73,
> > Larry, W0QE
> > _______________________________________________
> > Amps mailing list
> > Amps@contesting.com
> > http://lists.contesting.com/mailman/listinfo/amps
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps