It needs the appropriate PF correction circuitry, too.
73
Peter G3RZP
========================================
Message Received: Sep 22 2013, 05:10 AM
From: "Don Jones" <ko7i@comcast.net>
To: amps@contesting.com
Cc:
Subject: Re: [Amps] Direct rectification of AC mains to drive the amp, VDD
Supply
This is tricky. If the outlet you are using as the source is not daisy
chained to a bunch of other outlets and goes directly to the panel, and
you use a true 3 wire connection L1, L2 (or N) and Gnd, you can "get
away" with it provided you use an appropriately selected EMC filter too.
It is safe and efficient? no, heed the advice that you have been given
by others.
Vy 73, Don KO7i.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|