Re: [Amps] Autek WM-1 Schematic or Help

[Jim W7RY <w7ry@centurytel.net>]

Thanks all for sending pictures and other stuff!

Got it all back to working and calibrated.
73
Jim W7RY


On 11/8/2013 9:36 PM, Jim W7RY wrote:
> BTW the manual has a bit of a schematic, but the choke is not shown.
>
> Thanks
> 73
> Jim W7RY
>
> On 11/8/2013 9:24 PM, Jim W7RY wrote:
> > I have a problem with an Autek WM1 measring the output of my 
> > amplifier. :)
> > Does anyone have a schematic for the Autek WM-1? A Google search 
> > found nothing.
> > Mine looks like it has a wiring error. The center tap of the sens 
> > transformer is not hooked to anything.. Also there is a small choke 
> > on the output connector, then that goes to 2ea 10 PF caps in series, 
> > then to the board. The small choke is smoked/burned.
> > Any idea what the value of the choke is? Anyone have a picture of the 
> > internal of the sensor module?
> > Thanks
> > 73
> > Jim W7RY
> >
> > _______________________________________________
> > Amps mailing list
> > Amps@contesting.com
> > http://lists.contesting.com/mailman/listinfo/amps
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps